Computer Help Please!

[HM04]

Have you got your frames on VSync set to 20? Change it to 60.
Google how to do it with NVIDIA or what ever graphics card you have.
It's usually in your graphics card's control panel.

If I had a vsync set I dont think it would say i am getting 200 frames.

 

[HM04]

Vsync just caps the fps at what your monitors maximum refresh rate, usually this is 60+. If you disable Vsync then does it go back up again?

If I put V-sync on it feels the same, but it just says 60 instead of the 200 frames or whatever.

 

[HM04]

May I have your PC specs? Is MC installed on an SSD or HDD? Have you modified the BIOS at all recently (

Havent touched my BIOS, no clue how to.
Custom built:
AMD FX-6300
Nvidia GTX 660
8GB of DDR3
1TB Western Digital Black HDD
Don't remember the PSU name.

 

[HM04]

Hmm well it's a little far fetched but see if you can get a S.M.A.R.T HDD diagnostic test to run. It could be that the HDD is beginning to degrade and cause the game to load into ram slower hence the delay/lag.

https://gyazo.com/bc0bdbaffc35d1471c034e1125b201eb

 

[HM04]

Hmmm that HDD seems fine. When you press F3, on the right-hand side you should see what graphics chip is being used to run the game. Does it say GTX 660 or AMD integrated graphics?

I dont see anything about what is being used?

 

[iMCGamer]

Right now, my McAfee is taking up like 60% of my CPU. No clue why.

Nope

Have you checked to make sure McAfee isn't running an AV scan? They are heavy on your processor and you can adjust the % of CPU power you want to dedicate to the scan within the settings for the program.

 

[HM04]

Can you gyazo the MC screen when you press F3 please

http://prntscr.com/ak2mjj

 

[HM04]

Oh... You're using forge? What happens if you use vanilla MC? Just normal 1.8.9 or 1.9?

Same thing. Also, says I am running on my GTX 660

 

[HM04]

Can you print screen F3 while on 1.8.9 vanilla please.

http://prntscr.com/ak2qj3

 

[HM04]

Ok so it says 60fps with Vsync enabled. But it is still very choppy ?

Yup, very.

 

[HM04]

Hmm, have you ensured all of the cables at the back are tight in the slots and the graphics card is seated properly?

The only thing I notice is that the graphics card can be wiggled up and down pretty easily.