Any pc experts?

[ToothPickz]

Bought some led lights to connect to my pc with RGB Fusion, and im wondering how i would install them.

here are the leds:
https://gyazo.com/6b0f906a1571c5b823f9ee43c4e7a724

 

[Norska]

Finding a tutorial on YouTube would be way easier than following a possible text tutorial on here.

 

[Ksg]

Hi, okay so you'll need to find the right drivers to install then it will work..

 

[Norska]

Were you asking for the physical installation process or the software one?

 

[ToothPickz]

You need to connect it to your PSU or motherboard, check if your PSU or mobo puts out 1.6v (thats the voltage of your led strip) and if it has a connector for your led strip. If not, buy a molex to DC power connector. The molex cable goes in your psu and the DC (round part) goes in your little black/white box, this powers the box and makes the voltage 1.6v

Thanks, going to install them once I’m home so in a few days, hopefully this works

 

[Zeiyon]

Try a youtube video or searching it up on google.
You should have also received a manual.

Anyway, you should have done the research before purchasing.

 

[ToothPickz]

Try a youtube video or searching it up on google.
You should have also received a manual.

Anyway, you should have done the research before purchasing.

Also I know they work with my pc just don’t know how to install them.

 

[Vip]

If I was you I'd buy a Toshiba unscrew it shove some lights in there and make it my Christmas tree.

 

[ToothPickz]

Done. they plugged straight into my motherboard and linked to rgb fusion so thanks for the help i guess.