Faction Spawn

Status
This thread has been locked.

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
Hello Everyone on MC-Market!

Today, I will be selling a Faction Spawn. I am new to selling builds and so I probably will be making tons of mistakes. If I do, then please correct me.

Here are the features that are inside this wonderful spawn! =)

First, here is the outside view. I couldn't do it in a flat area because it kept timing me out. -.-"


Second, there is the Market Stalls, Trees, and what you will see when you're going to drop out of spawn.


Third, there is the Enchantment Table + Anvil. Anvils are refillable if it ever breaks. Level 10 & 30 Enchantment Areas.


Fourth, here's the view when you look up.


Fifth, view when you look down.


Sixth, there are barriers above so if you want to add a drop party system.. You can. Although it's there to prevent rain. =)

Seventh, shop stairs.

Eighth, different screenshots of different angles of the shop.

Ninth, proof that I didn't just get images from Google Images. ;)

Tenth, random pictures of spawn..

Forgot to add the portals, and so adding it now: http://i.imgur.com/ZgHZUmy.png (RIP The Nonprofessional!) You can remove the portals if you want..

This is what you will get when you buy this spawn. A Schematic. Why a schematic? So you can place it anywhere you want.. I don't know how picky people are with what world they want to use or if you have a custom terrain.. Picture: http://prntscr.com/8doeq1

What you need to know about this spawn.. It's a sky spawn and it's medieval.

If you've found this spawn on another website or something, then please let me know.

Bidding Starts at $5
Bid Increasement at $5
Buy It Now at $50 (Give me suggestions)
Auction Ending at September 12, 2015 or 09/12/2015

Thank you! I don't even know why this is automatically bold.. -_- I tried unbolding.

- Samuel AKA Faker
 
Last edited:
PebbleHost
High performance, consistent uptime and fast support. Minecraft hosting that just works.

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
Maybe lower the spawn towards the ground?
If you want to do that for your spawn then feel free to. I'm not giving you a world.. Just schematic..

I can't be bothered to lower it or else I'll start crashing.. Tried to import it to a flat world.. Made me crash. LOL![DOUBLEPOST=1441644694,1441644626][/DOUBLEPOST]Also, don't tell me to take photos in Shaders since.. Whenever I install mods then my client crashes on every startup.. ;-; Especially OptiFine so I bought an OptiFine cape that I can't even use..
 

niek88

Premium
Feedback score
0
Posts
186
Reactions
54
Resources
0
Ill start off with 5$
 

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
The links in spoilers aren't working can u pm them to me or something sounds like a nice build
Sure, I'll just post them here if anyone else is having trouble. ;)

1. Pictures of Spawn when Spawn was still in construction:

2. Outside view of Spawn:

3. An Area near drop in Spawn:

4. Enchantment Table + Anvils: http://imgur.com/6bdCIVN

5. View of looking up in Spawn: http://imgur.com/dVVPUYx

6. View of looking down above Spawn: http://imgur.com/pV1nqj1

7. Barriers to prevent rain going into Spawn: http://i.imgur.com/Ourb5Lc.png

8. Shop Stairs or Shop Related: http://i.imgur.com/0cML3Cj.png http://i.imgur.com/ltaxjnW.png http://i.imgur.com/K1n6FYo.png http://i.imgur.com/ra3XXi5.png

9. Proof that any of them aren't from Google Images: http://i.imgur.com/ZghHk0u.png

10. Portals. (Forgot to add that!! Edited Thread): http://i.imgur.com/ZgHZUmy.png

11. The schematic you'll be receiving.. Forgot to add that to my reply.. ._. http://prntscr.com/8doeq1
 

Hexcore

GameVers Studios - CEO | Sapphire Studios - COO
Supreme
Feedback score
18
Posts
1,555
Reactions
620
Resources
0
Well, you should include the size of the spawn. Also, did you build this or do you own it, that's helpful to mention. Your BIN should maybe be around 20-25$, IMO. Other than that nice thread layout. Good job for a first time.
 

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
Well, you should include the size of the spawn. Also, did you build this or do you own it, that's helpful to mention. Your BIN should maybe be around 20-25$, IMO. Other than that nice thread layout. Good job for a first time.
Wait.. If you build it.. Don't you technically own it? xD Also.. I'll give this a rough estimate around 150x150 - 200x200.. I don't measure dimensions. :eek:

Thanks for the compliment and I'll put $50 for BIN for now.. Until I get opinions. c;
 

Hexcore

GameVers Studios - CEO | Sapphire Studios - COO
Supreme
Feedback score
18
Posts
1,555
Reactions
620
Resources
0
Wait.. If you build it.. Don't you technically own it? xD Also.. I'll give this a rough estimate around 150x150 - 200x200.. I don't measure dimensions. :eek:

Thanks for the compliment and I'll put $50 for BIN for now.. Until I get opinions. c;

If you are a solo-builder than yes. If you work in a team then no, your build team owns it.[DOUBLEPOST=1441646878,1441646817][/DOUBLEPOST]Also in my opinion. 50$ bin is way too high for a pre-made. If it's near the 200x200 go around 40$, is it's near the 150x150 end i'd say 30$.
 

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
If you are a solo-builder than yes. If you work in a team then no, your build team owns it.
I don't have a build team.. Although it'd be cool to have one. c;
 

Hexcore

GameVers Studios - CEO | Sapphire Studios - COO
Supreme
Feedback score
18
Posts
1,555
Reactions
620
Resources
0

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
Also in my opinion. 50$ bin is way too high for a pre-made. If it's near the 200x200 go around 40$, is it's near the 150x150 end i'd say 30$.
True, but people can either BIN my price or they can choose a price around that range. =P That's how I work. xD I use "$50" so that I can get people to know what range I'm looking for. So for an example..

Me: BIN is $50
Someone: I'll BIN for $45
Me: Sure

Orr

Me: BIN is $50
Someone: Bid $40
Someone2: Bid $50
Someone: BIN $60 please.

I don't know, just an idea! :D
If you'd want to join one as a Trial-Builder you can join Noventa Build Team. We are a newer team but are getting decent commissions. We are so far a total team of 8 Members. Here's our recruitment page: http://www.mc-market.org/threads/33346/
I'm not really into building anymore.. This build was like.. A month ago or something. Lawl
My Skype is Thecobrastriker please add me.
Added.
can u add me on Skype?
Your Skype is? Mine is samuel.tsui549
 

Hexcore

GameVers Studios - CEO | Sapphire Studios - COO
Supreme
Feedback score
18
Posts
1,555
Reactions
620
Resources
0
I don't have a build team.. Although it'd be cool to have one. c;
If you've got the finances, try making your own. Wouldn't encourage it but you could do well so I'll suggest it.
I'd personally get some experience with a team prior to making one but that's just me.
 

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
If you've got the finances, try making your own. Wouldn't encourage it but you could do well so I'll suggest it.
I'd personally get some experience with a team prior to making one but that's just me.
I've made a team once, but.. I got bored of it. Lol..

Team consisted of builders, gfx artists, and developers.. It disbanded because..

A) A builder was toxic and then started DDoSing everyone so I couldn't risk it anymore.. Also he was a greedy punk..
B) Too much fighting and arguing
C) I was bored of it. LOL!

Although we did make some business with some clients..
 

Hexcore

GameVers Studios - CEO | Sapphire Studios - COO
Supreme
Feedback score
18
Posts
1,555
Reactions
620
Resources
0
Alright. haven't had that yet with my team. Hopefully wont ever.
 

Tehker

Schleep
Premium
Feedback score
26
Posts
1,175
Reactions
307
Resources
0
Status
This thread has been locked.
Top