VectorGuard
Production-grade combat anti-cheat for Paper servers.
VectorGuard is a 100% server-side anti-cheat plugin focused exclusively on combat detection. It uses packet-level analysis, tick-based telemetry, and multi-signal detection to identify cheaters with high accuracy and minimal false positives.
Built from the ground up for modern Paper servers (1.20.x–1.21.x) with Java 21.
Product Overview
VectorGuard is a combat-only anti-cheat designed to catch the most common PvP exploits while staying light on performance and fair on legitimate players. Every check uses multiple independent signals (rotation, timing, movement, cooldown usage, and hit validation) and applies buffered violations with decay, so one-off spikes do not punish normal players. Ping-aware thresholds and packet-timing compensation reduce false positives for high-latency players.
Administrators get a fast response workflow: clickable in-game alerts with action buttons, a threat score that aggregates risk across checks, and a visual report command for quick evidence review. A built-in GUI lets staff adjust thresholds, toggle checks, and tune punishments without editing files or restarting the server. Alerts can also be mirrored to Discord for off-server monitoring.
VectorGuard ships as a single jar with no external dependencies. PacketEvents is embedded, and the plugin runs entirely server-side with no client mod required.
Features
Detection Engine
Admin Experience
Architecture
Checks
Combat
Packet
Requirements
Installation
1. Download
2. Place it in your server's
3. Start or restart the server
4. Edit
5. Use
Commands
Permissions
Configuration
All settings are in
Check Configuration
Each check has:
Punishment Stages
Discord Webhooks
Admin Alerts
GUI Config Editor
Run
FAQ
Q: Does this require players to install anything?
A: No. VectorGuard is 100% server-side.
Q: Is PacketEvents required as a separate plugin?
A: No. PacketEvents is embedded inside the VectorGuard jar.
Q: Does it work with Purpur/Pufferfish/other Paper forks?
A: Yes, any Paper fork should work.
Q: Will it conflict with other anti-cheats?
A: VectorGuard focuses only on combat. It can coexist with movement-focused anti-cheats, but running two combat anti-cheats may cause duplicate flagging.
Q: How do I reduce false positives?
A: Increase the
Credits
Created by Mr. NeonDev
License
Copyright (c) 2025 NeonDev. All Rights Reserved.
This software and its source code are the exclusive property of NeonDev.
No part of this software, including but not limited to the source code, compiled
binaries, documentation, configuration files, or any associated assets, may be
used, copied, modified, merged, published, distributed, sublicensed, sold, or
otherwise exploited for any purpose without the prior written permission of the
copyright holder.
Unauthorized use, reproduction, or distribution of this software, or any portion
of it, is strictly prohibited and may result in civil and criminal penalties.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Production-grade combat anti-cheat for Paper servers.
VectorGuard is a 100% server-side anti-cheat plugin focused exclusively on combat detection. It uses packet-level analysis, tick-based telemetry, and multi-signal detection to identify cheaters with high accuracy and minimal false positives.
Built from the ground up for modern Paper servers (1.20.x–1.21.x) with Java 21.
Product Overview
VectorGuard is a combat-only anti-cheat designed to catch the most common PvP exploits while staying light on performance and fair on legitimate players. Every check uses multiple independent signals (rotation, timing, movement, cooldown usage, and hit validation) and applies buffered violations with decay, so one-off spikes do not punish normal players. Ping-aware thresholds and packet-timing compensation reduce false positives for high-latency players.
Administrators get a fast response workflow: clickable in-game alerts with action buttons, a threat score that aggregates risk across checks, and a visual report command for quick evidence review. A built-in GUI lets staff adjust thresholds, toggle checks, and tune punishments without editing files or restarting the server. Alerts can also be mirrored to Discord for off-server monitoring.
VectorGuard ships as a single jar with no external dependencies. PacketEvents is embedded, and the plugin runs entirely server-side with no client mod required.
Features
Detection Engine
- 19 combat checks targeting the most common cheat modules including Mace PvP exploits, crystal PvP automation, bow manipulation, and inventory exploits
- Multi-signal compound detection — each check combines multiple independent signals for high confidence
- Buffered violation system with configurable decay — prevents single-tick flukes from triggering punishments
- Latency compensation — all checks account for player ping to avoid false-flagging high-ping players
- Tick-based analytics with per-player position history and rotation profiling
Admin Experience
- Clickable chat alerts with action buttons:
[TP] [VL] [DBG] [RPT] - Threat score system — composite 0–100% risk assessment across all checks
- Visual threat reports via
/vg report <player> - Sound alerts for online admins (configurable)
- Discord webhook integration for off-server monitoring
- In-game GUI for editing thresholds, toggling checks, and tuning punishments
Architecture
- 100% server-side — no client mod required
- PacketEvents embedded and shaded — zero external dependencies
- Modular check system — each check is independent and fully configurable
- Performance profiler built-in (
/vg profile) - Multi-version support — Paper 1.20.x through 1.21.x
Checks
Combat
| Check | Description |
| Aimbot | Detects snap rotations, acceleration spikes, over-smooth curves, and precision patterns consistent with aim as |
| TriggerBot | Identifies automated attack timing with near-zero reaction delay after crosshair alignment |
| AutoTotem | Catches unrealistically fast offhand totem swaps during lethal damage windows |
| Reach | Eye-to-hitbox distance verification with ping, sprint, and movement lenie |
| Velocity | Detects Anti-Knockback by verifying displacement after server-sent velocity packe |
| Criticals | Identifies fake critical hits via spoofed position packets (abnormal crit rate, ground-flag oscillation, tiny Y offsets) |
| AutoClicker | Catches robotic click patterns through timing variance analysis (stddev, CPS, coefficient of variation) |
| KillAura | Detects multi-target attacks, angle mismatch, wall attacks, and perfect cooldown abuse |
| Sprint | Identifies backwards sprinting, KeepSprint, and sprint-toggle patterns around att |
| MaceSpoof | Detects spoofed fall-distance position packets for fake Mace smash damage (Criticals-Mace exploit) |
| MaceNoFall | Catches NoFall + Mace combos: players deal Mace fall-bonus damage but evade fall damage on landing |
| MaceSwap | Identifies automated weapon switching to Mace during falls (AttributeSwap / auto-swap patterns) |
| CrystalAura | Detects automated crystal place-and-break cycles (superhuman crystal attacks/sec, place→break pairing, fast-break ratio) |
| BowManipulation | Catches BowSpam and BowAimbot via charge variance analysis, fire rate, and abnormal hit rates at distance |
| InventoryCleaner | Identifies inhuman inventory manipulation speed (AutoTotem swaps, chest stealing, combat inventory use) |
| AutoWeapon | Detects automated weapon switching around attacks (pre-attack swap ratio, A→B→A swap-back patterns) |
| AutoArmor | Catches expanded entity hitboxes via lateral offset analysis and edge-hit rate tracking |
| HitboxExpand | Catches expanded entity hitboxes via lateral offset analysis and edge-hit rate tracking |
Packet
| Check | Description |
| Timer | Detects game speed manipulation via packet rate analysis (burst, sustained, and average rate monitoring) |
Requirements
- Java 21+
- Paper 1.20.x – 1.21.x (or forks: Purpur, Pufferfish, etc.)
- No external dependencies — PacketEvents is embedded
Installation
1. Download
VectorGuard-1.1.0.jar2. Place it in your server's
plugins/ folder3. Start or restart the server
4. Edit
plugins/VectorGuard/config.yml to customize thresholds5. Use
/vg reload to apply changes without restartingCommands
| Command | Description |
/vg reload | Reload configuration |
/vg debug <player\|*> | Toggle debug output for a player (or all) |
/vg vl <player> | View violation levels |
/vg report <player> | Generate a visual threat report |
/vg gui | Open the in-game config edito |
/vg profile [seconds] | Run performance profiler |
Permissions
| Permission | Default | Description |
vectorguard.admin | op | Access to all /vg commands and GUI |
vectorguard.alert | op | Receive in-game cheat alerts with action buttons |
vectorguard.debug.view | op | View debug output |
vectorguard.report | true | Allows using /vg report to generate threat reports |
Configuration
All settings are in
plugins/VectorGuard/config.yml.Check Configuration
Each check has:
enabled— toggle the check on/offbuffer-threshold— buffer must exceed this to flagbuffer-decay-per-tick— buffer decreases each tickvl-per-breach— violation level added per flagvl-decay-per-tick— VL decreases each tickthresholds.*— check-specific tuning values
Punishment Stages
YAML:
punishments:
alert-vl: 2.5 # Send alert to admins
setback-vl: 6.0 # Teleport player to last safe position
punish-vl: 12.0 # Execute punishment command
punish-command: "kick %player% Unfair combat behavior detected by VectorGuard."Discord Webhooks
YAML:
notifications:
discord:
enabled: true
webhook-url: "https://discord.com/api/webhooks/..."
min-vl: 5.0
cooldown-ms: 10000Admin Alerts
YAML:
notifications:
admin:
sound-enabled: true
clickable-actions: true
show-threat-score: trueGUI Config Editor
Run
/vg gui to open an interactive GUI where you can:- Toggle checks on/off
- Edit buffer thresholds and VL values
- Adjust punishment thresholds and cooldowns
- Save changes to config and reload
FAQ
Q: Does this require players to install anything?
A: No. VectorGuard is 100% server-side.
Q: Is PacketEvents required as a separate plugin?
A: No. PacketEvents is embedded inside the VectorGuard jar.
Q: Does it work with Purpur/Pufferfish/other Paper forks?
A: Yes, any Paper fork should work.
Q: Will it conflict with other anti-cheats?
A: VectorGuard focuses only on combat. It can coexist with movement-focused anti-cheats, but running two combat anti-cheats may cause duplicate flagging.
Q: How do I reduce false positives?
A: Increase the
buffer-threshold and ping-cutoff-ms values for checks that are flagging incorrectly. The defaults are tuned conservatively.Credits
Created by Mr. NeonDev
License
Copyright (c) 2025 NeonDev. All Rights Reserved.
This software and its source code are the exclusive property of NeonDev.
No part of this software, including but not limited to the source code, compiled
binaries, documentation, configuration files, or any associated assets, may be
used, copied, modified, merged, published, distributed, sublicensed, sold, or
otherwise exploited for any purpose without the prior written permission of the
copyright holder.
Unauthorized use, reproduction, or distribution of this software, or any portion
of it, is strictly prohibited and may result in civil and criminal penalties.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
